Ingxenye eyodwa enokuqukethwe okuphezulu kwe-zinc nomthelela wesiliva, esetshenziswa ungqimba olulodwa noma ijazi eliphezulu eline-zindn galvanizing
Izici
Uthuli lwe-1.Zinc lusetshenziswa kanye ne-flake aluminium powder, umphumela wensimbi muhle;I-flake aluminium powder ihlelwe ngokuhambisana nefilimu yokugqoka, engavimbela ukungena komswakama kanye nemisebe ye-ultraviolet kwifilimu yokugqoka.
2.Uhlelo lokusebenza olulula kanye ne-Eco-friendly
3.Ukusebenza okuhle kakhulu kwe-anti-discoloration emvuleni yangaphandle
4.Okuqukethwe kothuli lwezinc≥80%, i-aluminium powder≥10%
Ukusetshenziswa okunconyiwe
Isakhiwo sensimbi izinhloso zesikhathi eside zokulwa nokugqwala, singasetshenziswa njengejazi elilodwa, futhi singasetshenziswa njengejazi eliphezulu eline-ZD ebandayo yokufaka ama-galvanizing compound.
Ukuthintwa kwe-galvanized steel structure, into engcono kakhulu yokufaka esikhundleni noma ukuthintwa kwezendlalelo ezishisayo ezifuthoze ezinamakhava kanye nediphu eshisayo.
Imiyalo yohlelo lokusebenza
Ukwelashwa Okusebenzayo kwe-Substrate kanye Nomphezulu:
Insimbi: ukuqhuma okuhlanzwe ku-Sa2.5 (ISO8501-1) noma ubuncane be-SSPC SP-6, iphrofayela eqhumayo i-Rz40μm~75μm (ISO8503-1) noma ithuluzi lamandla elihlanzwe ukuze libe ubuncane be-ISO-St3.0/SSPC SP3
Thinta phezulu kwendawo eyakhiwe ngamapulangwe
Khipha igrisi ngokuphelele endaweni nge-ejenti yokuhlanza, hlanza usawoti nokunye ukungcola ngamanzi ahlanzekile anomfutho ophezulu, sebenzisa ithuluzi lamandla ukupholisha indawo yokugqwala noma isikali sokugaya.
Kuyasebenza Futhi Ukwelapha
Impilo yebhodwe:okungenamkhawulo
Izinga lokushisa lendawo yohlelo lokusebenza:0℃-50℃
Umswakama womoya ohlobene:≤95%
Izinga lokushisa le-substrate ngesikhathi sokufakwa kanye nokwelashwa kufanele okungenani libe ngu-3℃ ngaphezu kwendawo yamazolo
Ukusetshenziswa kwangaphandle akuvunyelwe esimweni sezulu esibi njengemvula, inkungu, iqhwa, umoya onamandla nothuli olunzima
Izinga lokushisa liphezulu ehlobo, qaphela lapho ufafaza okomile, futhi uhlale unomoya ngesikhathi sokufaka kanye nezikhathi zokomisa ezindaweni eziwumngcingo.
Izindlela zokufaka isicelo
Isifutho esingenamoya /isifutho somoya/ibhulashi/irola
I-brush ne-roller coating inconywa kuphela ngejazi lemigqa, ukumbozwa kwendawo encane noma ukuthinta futhi kungase kubangele umehluko wombala.
Amapharamitha wohlelo lokusebenza
| Indlela yohlelo lokusebenza | Iyunithi | Isifutho esingenamoya | Isifutho somoya | Ibhulashi/Irola |
| I-Nozzle orifice | mm | 0.43-0.53 | 1.5-2.5 | —- |
| Umfutho we-Nozzle: | kg/cm2 | 150-200 | 3; 4 | —- |
| Mncane | % | 5; 10 | 10 - 20 | 0～10 |
Ukomisa & Ukwelapha
| Izinga lokushisa le-substrate | 5℃ | 15℃ | 25℃ | 35℃ |
| Ingaphezulu-yomile | 2 amahora. | 1 ihora. | 30 imiz | 10 imiz |
| Ngomile | 5 amahora. | 4 amahora | 2 amahora. | 1 ihora. |
| Isikhawu sokuvuselela Ubuncane. | 5 amahora. | 4 amahora | 2 amahora. | 1 ihora. |
| Isikhawu sokubuyisela i-Max. | Ukufakwa kabusha akunamkhawulo, indawo eboshiwe kufanele ingabi ne-chalking nokunye ukungcola.Yigcine ihlanzekile futhi yomile.Uma kunesidingo, yenza i-roughening eyanele ngaphambi kokumboza. | |||
Ukwandulela & Okulandelayo
Ijazi elandulele:I-ZD Cold Galvanizing, noma fafaza ngokuqondile phezu kwensimbi noma insimbi eshisayo efakwe uthayela noma efuthwe ngokushisa nge-Sa2.5 noma i-St3.
Ijazi elilandelanayo:Ngaphansi kwezimo ezivamile, akukho enamathela umphumela edingekayo.
Ukupakisha & Isitoreji
Ukupakisha:25kg
Iphuzu elikhanyayo:>27℃
Isitoreji:Kufanele igcinwe ngokuhambisana nemithetho kahulumeni wendawo.Indawo yokugcina impahla kufanele yomile, ipholile, ingene umoya futhi iqhelelane nokushisa nemithombo yomlilo.Isitsha sokupakisha kufanele sigcinwe sivalwe ngokuqinile.
Impilo yeshelufu:Iminyaka engu-2 isesimweni esihle sokulondoloza.